|
|
|
HURCO CNC Lathe, in very good used condition, S1 / S2 hours 1200 / 900, POA |
| TMX8 MYS, swing over bed / carriage ø508 / ø336 mm, 725 mm BC, spindle speed / bore 4500 rpm / ø65 mm, 12× turret with live tools, CY-axis, tooling |
| Machine operating hours: 8300, main spindle operating hours: 1200, subspindle operating hours: 90 |
| Year: 2014 |
|
|
|
| |
|
|
|
TOS Centre Lathe, in very good used condition |
| SUI 80×3000, swing over bed / carriage ø800 / ø520 mm, DBC 3000 mm, spindle speed / bore 1800 rpm / ø71 mm |
| Price should be understood ExWorks (INCOTERMS®). |
| Year: 1991 |
|
|
|
| |
|
|
|
TOS TRENCIN (TRENS) Centre Lathe (2002), in very good used condition |
| SN 32, swing over bed / carriage / in gap ø330 / ø168 / ø520 mm, DBC 1000 mm, spindle speed / bore 2500 rpm / ø52 mm |
| Year: 2002 |
|
|
|
| |
|
|
|
HACO CNC Guillotine Shear (2023), new machine, never used |
| HLSX 4010, cutting capacity in steel 405010 mm, incl. 2× sets of blade |
| Price should be understood ExWorks (INCOTERMS®) loaded on truck. |
| Year: 2023 |
|
|
|
| |
|
|
|
Floor Plates, 2× in condition of a new, never been used, price per pce |
| Size 4000×2000 mm, weight ca. 5500 kg, 8× T-slots lengthwise, side connecting pockets |
| Price should be understood ExWorks (INCOTERMS®) per pce. |
|
|
|
|
| |
|
|
|
GEKA Hydraulic Punching Machine, in good used condition |
| PP50, max punching capacity ø27×13 mm |
| Price should be understood ExWorks (INCOTERMS®) |
| Year: 1997 |
|
|
|
| |
|
|
|
GEKA Hydraulic Ironworker, in good used condition |
| Minicrop, cutting capacity at 90 flat / L / Ø / square 300×10 mm / 80×80×8 mm / ø30 mm / 30 mm, notching & punching stations |
| Price should be understood ExWorks (INCOTERMS®). |
| Year: 1994 |
|
|
|
| |
|
|
|
PEDDINGHAUS Punching Press (2011), in very good used condition |
| Hydraulic 280, force 280 kN, capacity ø31×7 mm / ø15×15 mm |
| Price should be understood ExWorks (INCOTERMS®). |
| Year: 2011 |
|
|
|
| |
|
|
|
CHEVALIER CNC Flat Bed Lathe, in good used condition |
| FCL-2480 S, turning capacity ø600×2000 mm, spindle speed / bore 1800 rpm / ø80 mm, tailstock |
| Price should be understood ExWorks (INCOTERMS®). |
| Year: 2001 |
|
|
|
| |
|
|
|
CSEPEL CNC Travelling Column Radial Drilling Boring and Tapping Machine, in very good used condition, only 100 work hrs, POA |
| B50M CNC-16000, drilling capacity in steel ø50 mm, arm length 1600 mm, column travel 12500 mm |
| Year: 1998 |
|
|
|
| |
|
«222324252627282930313233343536373839404142» |
| |
