|
|
|
DMG MORI 5-axis Machining Centre (2016), excellent condition, well maintained, video, POA |
| DMU 210P, workpiece size Ø×H ø2500×1460 mm / 8 t, XYZ/BC 1800×2100×1250 mm / +30°÷-210°×360,000°, spindle 24000 rpm, 100 ATC HSK A63, accessories |
| Machine comes from Head Lamp Mould Center, machined auto head lamp moulds only, no job lots. Well maintained, in excellent condition. |
| Year: 2015 |
|
|
|
| |
|
|
|
WILLEMIN MACODEL 5-axis Machining Centres, 4× in very good used condition 2003-2007, POA |
| W 408 B & W 408 MT, XYZ 250×200×300 mm, spindle 30000 rpm / 10 kW, 48× ATC HSK-E40, spares |
| Machines can be sold as lot or separately. |
|
|
|
|
| |
|
|
|
HAAS 5-axis Universal Machining Centre (2021), top condition, POA |
| UMC-1000, table size / load ø635 mm / 454 kg, XYZ 1016×635×635 mm, spindle speed / power 8100 rpm / 22.4 kW, 30+1× ATC SK 40 |
| Manufactured 2021, ran 2022. Power on ca. 4300 hr, cycle start time ca. 2200 h. |
| Year: 2021 |
|
|
|
| |
|
|
|
MIKRON 5-axis Universal Machining Centre, in working order |
| UMC 710/900, table 1200×600 mm, XYZ 900×630×500 mm, spindle 6300 rpm / 11 kW, 2× 22× ATC ISO 40, ø630 mm 2-axis table (4&5 axis) |
| Year: 1996 |
|
|
|
| |
|
|
|
CHIRON 5-axis Universal Mill Turn Centre, very good condition, visible under power, VIDEO |
| MILL 800, table size / load 1400×500 mm / 1200 kg, XYZ/B 800×500×550 mm / ±100°, mill / turn spindle 12000 / 6000 rpm, 65× ATC HSK-A 63, barload, swar |
| Year: 2006 |
|
|
|
| |
|
|
|
WANTED: DMG Machining Centre, 2015+ |
| DMU 125P/85P, 10000 rpm, HEIDENHAIN control |
| Year: 2015 |
|
|
|
| |
|
|
|
WANTED: STARRAG HECKERT 5-axis Machining Centre, 2016+, analogues considered |
| STC 800, X 1500 mm |
| Year: 2016 |
|
|
|
| |
|
|
|
WANTED: DMG 5-axis Machining Centre or analogue |
| DMU 50 or DMU 60 |
|
|
|
|
| |
|
|
| |
