|
|
|
DOOSAN 8-axis Twin-spindle Twin-turret Turning Center, in very good used condition, visible under power, ca. 8810 run hours, lots of videos, POA |
| PUMA TT 2500 SY, chuck size10", turning capacity ø390×350 mm, 2× XZC-axis, BY-axis, 2× 12× turrets, tooling |
| More pictures and videos available on request. |
| Year: 2006 |
|
|
|
| |
|
|
|
HELLER CNC 4-Pallet Horizontal Machining Centre, in good used condition, POA |
| MCS-H400, pallet size 4× 1000×800 mm,XYZ 1250×1000×1250 mm, spindle taper SK 50, WKM-1000 fixtures |
| Year: 2001 |
|
|
|
| |
|
|
|
SCHUMAG Centreless Grinder, in very good used condition, refurbished, POA |
| SCHLEIPO I / 700, bar capacity ø22×4000 mm, new control cabinet |
| Machine had been totally sanblasted, repainted, wear and tear parts changed, new electrical cabinet and test run well. |
|
|
|
|
| |
|
|
|
SCHUMAG Centreless Grinder, in very good used condition, refurbished , POA |
| SCHLEIPO I / 700, bar capacity ø22×4000 mm, new control cabinet |
| Machine had been totally sanblasted, repainted, wear and tear parts changed, new electrical cabinet and test run well. |
|
|
|
|
| |
|
|
|
SCHUMAG Centreless Grinder, in very good used condition, refurbished , POA |
| SCHLEIPO I / 589, bar capacity ø16×4000 mm |
|
|
|
|
| |
|
|
|
SCHUMAG Centreless Grinder, in very good used condition, refurbished , POA |
| SCHLEIPO I / 589, bar capacity ø16×4000 mm |
|
|
|
|
| |
|
|
|
MAS KOVOSVIT CNC Flat Bed Lathe, in good used condition, POA |
| MASTURN 54/1500, chuck ø315 mm, swing over bed / carriage ø540 / ø350 mm, DBC 1500 mm, Multifix-C turret, steady, 15-20 toolholders, tooling |
| Year: 2004 |
|
|
|
| |
|
|
|
TOS KURIM CNC Bridge Type Plano Mill, in very good working condition, retrofitted 2003, POA |
| FREP-D 20×40A, table 2000×8500 mm / 5000 kg/lm, XYZW 9000×3180×1950×2295 mm, 2750 mm BC, 2× V- and 2× H-headstocks, 3× milling heads |
| The machine is retrofitted in 2003 with new SIEMENS automatic controller and new SIEMENS drives. |
| Year: 1986 |
|
|
|
| |
|
|
|
WANTED: Heavy Duty Centre Lathe, conventional or CNC, in working order |
| Turning diameter min ø600-ø700 mm, turning length min 11000 mm, maximum 10-15 year old |
|
|
|
|
| |
|
|
|
WANTED: NC/CNC Double Column Vertical Turning Lathe, in working order |
| Table diameter ø7500-ø8000 mm, urning diameter ø10000 mm, height under cross rail as much as possible |
|
|
|
|
| |
|
«123456789101112131415161718192021» |
| |
